ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
b.
Service/Repair
(1)
Clean pins (2) and holes in fixed support (4) and trunnion (3) with crocus cloth.
(2)
Remove burrs with flat file.
(3)
Replace components that are damaged, distorted or bent.
c.
Installation
(1)
Install trunnion (3) in fixed support (4).
(2)
Insert pin (2) and check that trunnion (3) pivots freely.
(3)
Insert new cotter pins (1) through each end of pin (2), then bend prongs in opposite directions around
end of pin.
8-35
