ARMY TM 5-5420-212-10-1
MARINE CORPS TM 08676A-10/1-1
(4)
Remove puller from bath, and shake vigorously to loosen and remove foreign matter. If necessary, allow
more time to soak.
(5)
Ensure that all solvent is drained and evaporated from puller before adding lubricant.
WARNING
Lubricants containing molybdenum disulphide must not be used.
(6)
Pour gear oil through the slot (2), shake the puller then allow to drain.
NOTE
Excess lubrication cannot cause the wire rope to slip.
(7)
Wipe oil from outside surfaces.
8-39
