TM 5-5420-226-20-2
ENGINE OIL COOLER REPLACEMENT (Sheet 3 of 6)
1 1 . Using 1/2 inch socket with extension
through harness and into bracket, remove
two screws and lockwashers (J).
12.
Lower harness away from coolers with
bracket attached.
Using 1/2 inch socket, remove four screws and
13.
to cooler.
14.
Lift away oil cooler screen.
CAUTION
Support oil cooler to keep it from falling while doing step 13.
Using 3/4 inch wrench, remove four screws and lockwashers (L) holding oil cooler frame.
15.
Lift away oil cooler and mounting brackets.
16.
TA107491
Go on to Sheet 4
6-21