TM 5-5420-226-20-2
THERMOSTATIC TRANSMISSION OIL COOLER VALVE ASSEMBLY (RIGHT SIDE)
TEST AND REPLACEMENT (Sheet 3 of 6)
REMOVAL:
1.
Place rags under tube end fittings (A
and B) on transmission.
NOTE
It may be necessary to hold adapters
(C and D) with 1-5/8 inch wrench
while removing tube end fittings
(A and B).
2.
Using 1-1/2 inch wrench, remove tube
end fitting (A) from adapter (C).
3.
Using 1-1/2 inch wrench, remove tube
end fitting (B) from adapter (D).
4.
Place rags under tube end fittings
(E and F) on oil cooler.
NOTE
It may be necessary to hold adapters
(G and H) with 1-5/8 inch wrench
while removing tube end fittings
(E and F).
5.
Using 1-1/2 inch wrench, remove
outside tube end fitting (E) from
adapter (G).
6.
Using hands, displace outside tube
(J).
7.
Using 1-5/8 inch wrench, remove
adapter (G).
G O on to Sheet 4
TA107504
6-34