TM 5-5420-226-20-2
TRANSMISSION OIL COOLER REPLACEMENT (Sheet 2 of 10)
NOTE
Removal procedures are the same for the right and left
coolers except that the upper rear mount bolt on the right
cooler additionally secures support bracket (A).
REMOVAL:
Using screwdriver, loosen clamp (B) to
1.
remove air inlet hose (C). Remove air
inlet hose (C).
2.
Place cover over air inlet port to keep
out dirt.
Place drip pan or rags under transmission
3.
connectors (D).
4.
Using 1-5/8 inch wrench, remove
hose (E) at transmission connectors
(D).
.
5.
Using 1-5/8 inch wrench, remove
hose (F) at transmission connectors
(D).
TA107509
Go on to Sheet 3
6-39
