TM 5-5420-226-20-2
MULTIPLE FLUID PRESSURE LINE CONNECTOR REPLACEMENT (Sheet 3 of 6)
Using 1/2 inch socket, remove loop clamp
8.
(K) that secures left hose (L) to engine
shroud.
Using 1/2 inch socket, remove loop clamp
9.
(K) that secures right hose (M) to engine
shroud.
Remove" hose grommets from left and
10.
right side engine shrouds.
Remove hoses (M) and (L) to inside.
11.
INSPECTION:
1.
Check hoses for cracks, holes and leaks.
2.
Check hose connectors for stripped threads
and wear.
Check loop clamps for serviceability.
3.
4.
Replace parts as needed.
ENGINE SHROUD
INSTALLATION:
Position connector (A) in engine shroud
1.
(B).
Using 1-1/8 inch deep well socket,
2.
secure connector (A) with flat washer
and retaining nut (C).
TA107571
Go on to Sheet 4
