TM5-5420-226-20-2
AIR CLEANER FILTER ELEMENT CLEANING OR REPLACEMENT (Sheet 2 of 5)
REMOVAL:
WARNING
if NBC exposure is suspected, all air filter media
should be handled by personnel wearing
protective equipment. Consult your unit NBC
Officer or NBC NCO for appropriate handling or
disposal instructions.
To prevent screws from pulling out of box and
injuring personnel, a minimum of 200 pounds
must be placed atop the door before attempting
to remove screws
1. Using socket, loosen three screws (A) and remove
from door (B).
2. Open door (B) until it rests on rear fender box,
3. Inspect gasket on door(B). If damaged, replace
4. Slide filter element (C) toward front of vehilce.
5. Carefully lift filter element (C) out of air cleaner
housing (D).
When removing filter element (C), use care not
to damage filter seal (E). Do not stand filter
element on seal end.
6. Cover engine air intake opening (F) with barrier mate-
rial to keep out dust
Goon to Sheet 3.
*US
GOVERNMENT
PRINTING
OFFICE:
1991-543-025
40005
