TM 5-5420-226-20-2
AIR CLEANER OUTLET ELBOW REPLACEMENT (Sheet 1 of 2)
TOOLS:
9/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Torque wrench with 1/2 in. drive
(0-175 lb-ft) (0-237 Nm)
10 in. extension with 1/2 in. drive
Pry bar
9/16 in. combination box and open end wrench
Universal joint with 1/2 in. drive
SUPPLIES:
Gasket
Self-locking nuts (14 required)
PRELIMINARY PROCEDURES:
Remove air cleaner (page 7-85)
Remove restriction indicator (page 7-84)
NOTE
Removal of left or right outlet elbow is the same. Left side shown.
REMOVAL:
Using socket and wrench, remove 14 nuts (A).
1.
Using pry bar, loosen elbow (B) from air
2.
cleaner.
Remove elbow (B) and gasket (C). Throw
3.
gasket away.
4.
Inspect studs for damaged threads and for
stamping of H on ends. If threads are damaged
or ends are not stamped with H, replace studs.
Go on to Sheet 2