TM 5-5420-226-20-2
AIR CLEANER DOOR REPAIR (Sheet 3 of 3)
INSTALLATION:
Lift door assembly (A) into place on air
1.
cleaner housing (B).
Using hammer, tap three straight pins (C)
2.
into three hinges (D).
Install three flat washers (E) onto three
3.
straight pins (C).
Using hammer, tap three new cotter pins
4.
(F) into holes in straight pins (C).
Using hammer, tap cotter pins (F) around
5.
straight pins (C) to secure washers (E) and
pins in place.
Make sure door assembly (A) is in closed
6.
position (lowered).
WARNING
To prevent screws from pulling out
of box and injuring personnel, a
minimum of 200 pounds must be
placed atop the door before install-
ing screws.
Using wrench, install and tighten three
7.
screws (G) to secure door assembly (A) to
air cleaner housing (B).
End of Task
Change 2
