TM 5-5420-226-20-2
FUEL SHUT-OFF HANDLE REPLACEMENT (Sheet 1 of 2)
TOOLS: Vise
1/2 in. combination box and open end wrench
Pin punch 1/8 inch
Ball peen hammer
Slip joint pliers
9/1 6 in. combination box and open end wrench
REFERENCES: TM 5-5420-226-10
PRELIMINARY PROCEDURE: Set ENGINE FUEL SHUT OFF switch to OFF (TM 5-5420-226-10)
REMOVAL:
Release spring (A) securing handle (B).
1.
2.
Hold extension (C) with 1/2 inch wrench while loosening jamnut (D) with 9/16 inch wrench.
3.
Remove handle (B) and handle extension
(C) as assembly from cable (E).
Remove jamnut (D).
4.
NOTE
If necessary, grip cable (E) with pliers to remove
handle (B) and extension (C).
DISASSEMBLY:
1. Using vise to hold handle (B)
drive two pins (F) out of
handle (B) `with hammer and
pin punch.
2. Separate handle (B) from
extension (C).
TA107770
Go on to Sheet 2