TM 5-5420-226-20-2
FUEL SHUTOFF CABLE ASSEMBLY REPLACEMENT (Sheet of 15)
PROCEDURE INDEX
PAGE
PROCEDURE
Removal
Installation
TOOLS:
Screwdriver, flat-tip, 1/4 in. wide
7/16 in. open end wrench (2 required)
3/4 in. open end wrench
15/16 in. open end wrench (2 required)
7/16 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
9/1 6 in. open end wrench
1/2 in. open end wrench (2 required)
Putty knife
Pliers
SUPPLIES:
Bushing (MS28775-10)
Packing (1094045 1)
Wire (8 to 10 ft) (Item 61, Appendix D)
Adhesive (Item 19, Appendix D)
PERSONNEL: TW O
REFERENCE: TM 5-5420-226-10
PRELIMINARY PROCEDURES:
Remove powerplant (page 5-2)
Remove fuel shutoff handle from bracket (page 7-163)
Remove subfloor access cover, directly in front of
operator's seat (page 17-10)
TA107772
Go on to Sheet 2