TM 5-5420-226-20-2
MANIFOLD HEATER (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 3)
INSTALLATION:
1.
Install elbow (A). Using 7/16 inch wrench,
tighten elbow.
2.
Install bushing (B). Using 9/16 inch wrench,
tighten bushing.
Install elbow (C). Using 1/2 inch wrench,
3.
tighten elbow.
Position new gasket (D) and manifold heater
4.
(E) onto manifold.
5.
Install four washers and new nuts (F) to secure
manifold heater.
6.
Using 1/2 inch open end wrench, tighten
nuts (F).
7.
Connect fuel return tube (G) to elbow. Using 9/16 inch open end wrench, tighten tube.
8.
Connect fuel input tube (H) to elbow. Using 7/16 inch open end wrench, tighten tube.
Connect ignition lead (J) to spark plug. Using 3/4 inch open end wrench, tighten ignition
9.
lead.
10.
Perform manifold heater operation check (page 7-298).
11.
Install powerplant (page 5-14).
End of Task
TA107895
7-288