TM 5-5420-226-20-2
MANIFOLD HEATER IGNITION COIL AND CABLE REPLACEMENT (Sheet 1 of 3)
TOOLS:
7/8 in. combination box and open end wrench
3/4 in. combination box and open end wrench
1/2 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
5 in. extension with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
Slip joint pliers
REFERENCE: TM 5-5420-226-10
Remove powerplant (page 5-2)
PRELIMINARY PROCEDURE:
NOTE
Replacement instructions are the same for both
Therefore, only the left side is shown.
sides.
TA107896
Go on to Sheet 2