4TM 5-5420-226-20-2
INTAKE TUBE AND HOSES REPLACEMENT (Sheet 1 of 1)
1/4 in. flat-tip screwdriver
TOOLS:
Silicone compound (Item 32, Appendix D)
SUPPLIES:
PRELIMINARY
PROCEDURE:
REMOVAL:
NOTE
Replacement of left or right intake tubes and hoses is the
same.
1.
Using screwdriver, loosen clamps (A) and
remove tube (B) or hose (C or D) as
required.
Remove clamps (A).
2*
INSTALLATION:
Lightly coat inside ends of hose
1.
with silicone compound.
Install two clamps (A) ontoh o s e
2.
Install hose (C) onto manifold (E) and tube (B). Using screwdriver, tighten clamps (A).
3.
Jnstall hose (D) onto tube (B) and cap assembly (F). Using screwdriver, tighten clamps (A).
4.
End of Task
Change 2