TM 5-5420-226-20-2
CAP ASSEMBLY REPLACEMENT (Sheet 1 of 3)
TOOLS:
1/4 in. flat-tip screwdriver
1/2 in. combination box and open end wrench
1/2 in. socket with 1/2 in. drive
7/16 in. socket with 1/2 in. drive
SUPPLIES:
Lockwasher (2 required)
Self-locking nut
Gasket
Silicone compound (Item 32, Appendix D)
PRELIMINARY PROCEDURE:
REMOVAL:
NOTE
Replacement of left or right cap
assembly is the same.
1.
Using screwdriver, loosen clamps (A) and
remove hoses (B) and tube (C) as a unit.
Go on to Sheet 2
Change 2