TM
5-5420-226-20-2
CAP ASSEMBLY REPLACEMENT (Sheet 2 of 3)
2.
Using wrench to hold nut (D), use 1/2 inch
socket and remove screw (E) securing
clamp (F). Discard nut (D).
3.
Remove clamp (F) from cap assembly (G).
4.
Using 7/16 inch socket, remove screw (H)
and lockwasher (J) securing cap assembly
(G).
5.
Using 1/2 inch socket, remove screw (K)
and lockwasher (L) securing cap assembly
(G).
Remove cap assembly (G) and gasket (M).
6.
Discard gasket.
Inspect bracket (N) for damage. If damaged and replacement is required, using 1/2 inch
7.
socket, remove two screws (P) securing bracket and remove bracket.
Go on to Sheet 3
Change 2
8-15
