TM 5-5420-226-20-3
FUEL TANK CAPAClTOR AND HOUSING ASSEMBLY REPLACEMENT (RIGHT)
(Sheet 3 of 5)
14. Using screwdriver, remove four screws
(W) and washers (X) from cover (U) and
adapter (T).
15. Separate cover (U), gasket (Y), and
adapter (T). Discard gasket (Y).
CLEANING AND INSPECTION:
1.Using putty knife, clean all areas where gaskets were mounted.
Cleaning agent specified is flammable. Use only in well ventilated aears. Keep away from
flames, sparks, or heat. Do not smoke while using. Prevent contact with eyes, mouth and/or
skin. Wear rubber gloves when performing cleaning procedures.
2.
Using dry cleaning solvent and lint-free cloth, wipe gasket surfaces clean.
3.
Inspect cable, adapter and cover for
damage. Replaced damaged parts.
INSTALLATION :
1. Position new gasket (A), and cover (B)
onto adapter (C).
2. Using screwdriver, install four screws (D)
and washers (E) securing cover and
gasket (A) to adapter (C).
Go on to Sheet 4
TA168969
