TM 5-5420-226-20-3
UNIVERSAL JOINT REPLACEMENT (Sheet 4.2 of 7)
INSTALLATION:
1 Position final drive flange (A) to universal
joint (B).
2. Using 13/ 16 inch socket, install four
screws (C).
3. Using torque wrench, tighten four screws (C)
to 110-130 lb-ft (146-173 Nm).
4. Using slip joint pliers, install locking wires
(D) to each two adjacent screws (C).
Go on to Sheet 5
Change 2
