TM 5-5420-226-20-3
SUSPENSION TORSION BAR REPLACEMENT (Sheet 2 of 7)
2.
Install socket wrench adapter into end plug (C).
NOTE
It may be necessary to use 36
inch bar extension.
3.
Using adjustable wrench or socket wrench
adapter, loosen end plug (C).
4.
Remove end plug (C) and spacer (D).
Have second person start engine. Then
5.
shift transmission into reverse and slowly
back vehicle up.
6.
Direct second person to stop vehicle when
support arm (E) is in down position.
7.
Using mallet, tap roadwheel arm lifter
off spindle stub. Remove lifter.
Co on to Sheet 3
Change 3
14-27
