TM 5-5420-227-24
SERVICING HYDRAULIC RESERVOIR FILTER ASSEMBLY (Sheet 1 of 2)
TOOLS: Flat-tip screwdriver (small)
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Packing (AN6230B37)
SUPPLIES:
Packing (MS28775-144)
Container (to catch fluid, approx. 2 gal.)
Lockwashers (4 required)
Rags (Item 12, Appendix D)
Dry cleaning solvent (It em 15, Appendix D)
REFERENCE:
PRELIMINARY PROCEDURE:
Relieve hydraulic pressure (page 3-65)
REMOVAL:
NOTE
A built in shut off will block the flow of
fIuid from reservoir when filter element is
removed.
1.
Position container to catch fluid.
Using socket, remove four screws (A) and
2.
lockwashers (B). Throw lockwashers (B)
away.
3.
Pull cover (C) with attached filter element
(D) from housing (E).
4.
Pull filter element (D) loose from cover (C).
5.
Using screwdriver, remove and throw away
two packings (F and G).
Go on to Sheet 2
3-200