TM 5-5420-227-24
HYDRAULIC FLUID FILTER ASSEMBLY REPAIR (Sheet 1 of 8)
PROCEDURE INDEX
PAGE
PROCEDURE
Disassembly
Cleaning and Inspection
Assembly
TOOLS:
18 in. pipe wrench
Hammer
9/64 in. socket head screw key (allen wrench)
1/4 in. socket head screw key (allen wrench)
Flat-tip screwdriver
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
Slip joint pliers
15/16 in. open end wrench
Gasket
SUPPLIES:
Preformed packing (2 required)
Rags (Item 12, Appendix D)
Dry cleaning solvent (Item 15, Appendix D)
Ring, wiper
Drive screws (4 required)
PERSONNEL: TW O
Remove filter assembly (page 3-202)
PRELIMINARY
PROCEDURE:
DISASSEMBLY:
1.
Using 1/4 inch screw key, remove plug (A)
from cover (B).
2.
Using socket, remove four screws (C) and
lockwashers (D). Throw lockwashers (D)
away.
Manually remove cover (B) and attached
3.
parts as an assembly from housing (E).
Go on to Sheet 2
TA170428
3-205
