TM 5-5420-227-24
OVERHEAD CYLINDER REPLACEMENT (Sheet 3 of 7)
Using snap ring pliers, remove two retaining
13.
rings (N).
Using hammer and drift, remove pin (P).
14.
Using 1-5/16 inch socket, remove 10 screws
15.
Using hammer and drift, remove pin (T).
16.
Using lifting device, remove overhead cylinder (M) from vehicle.
17.
Move overhead cylinder (M) to suitable work area.
18.
Remove sling.
19.
Remove container and throw away drained fluid.
20.
TA170444
Go on to Sheet 4
3-221