TM 5-5420-228-24
HEU HYDRAULIC RESERVOIR FILTER ASSEMBLY REPLACEMENT AND SERVICING
(Sheet 1 of 2)
PROCEDURE INDEX
Procedures
Page
Removal
Installation
TOOLS:
15 in. adjustable wrench
SUPPLIES:
Drip pans (suitable containers)
Preformed packing (2 required)
Dry cleaning solvent (Item 15, Appendix D) Rags (Item 12, Appendix D)
Gloves (Item 27, Appendix D)
REFERENCE: LO-12
PRELIMINARY PROCEDURES:
Zero hydraulic pressure (page 3-70.5)
NOTE
A built in shut off will block the flow of fluid from the reservoir when filter element
is removed. Use container to catch hydraulic fluid trapped in lines.
REMOVAL:
1.
Use adjustable wrench to loosen filter canisters (A) and (B).
2.
Remove canister (A) from filter housing (C).
3.
Remove preformed packing (D) and retainer (E) from filter housing (C).
4.
Manually remove filter element (F) from filter canister (A) and clean.
5.
Manually remove filter canister (B) from filter housing (C).
6.
Remove preformed packing (G) and retainer (H) from filter housing (C).
7.
Manually remove filter element (J) from filter canister (B) and clean.
Go on to Sheet 2
