TM 5-5420-228-24
HEU HYDRAULIC FILTER HOUSING REPLACEMENT (Sheet 1 of 2)
PROCEDURE INDEX
Procedures
Page
Removal
Installation
TOOLS:
3/4-in. socket with 1/2-inch drive
1/2-inch drive ratchet
9/16-in. socket with 1/2-inch drive
SUPPLIES:
Drip pans (suitable containers)
Lockwashers (as required)
Rags (Item 12, Appendix D)
REFERENCE: LO-12
PRELIMINARY PROCEDURES:
Hydraulic reservoir drained (page 3-74)
Hose assembly "BY" removed (page 3-204.56)
Hydraulic reservoir filters removed (page 3-204.65)
Valve bank return hose assembly "BT" removed (page 3-204.51)
Hose assembly "BU" removed (page 3-204.53)
NOTE
Use drip pans and rags to catch hydraulic fluid trapped in lines.
REMOVAL:
1.
Using 9/16 inch socket, remove three screws (A) and three lockwashers (B) from hydraulic filter housing (C).
2.
Remove hydraulic filter bracket (D) from hydraulic filter housing (C).
3.
Use 3/4 inch socket, remove four screws (E) from two clamps (F).
4.
Remove hydraulic filter housing (C) from vehicle.
Go on to Sheet 2
