TM 5-5420-228-24
HYDRAULIC RESERVOIR FILTER BRACKET REPLACEMENT (Sheet 1 of 2)
PROCEDURE INDEX
Procedures
Page
Removal
Installation
TOOLS:
9/16-in. socket with 3/8-inch drive
9/16-in. open end wrench
SUPPLIES:
Wood block
PRELIMINARY PROCEDURES:
REMOVAL:
CAUTION
Use wood block to support filters and housing prior to removing filter bracket.
Damage to equipment could occur.
1.
Use wrench to hold four nuts (A) and use socket to loosen screws (B).
2.
Remove four screws (B), nuts (A), and lockwashers (C) from hydraulic filter bracket (D).
3.
Remove filter bracket (D) from hydraulic reservoir (E).
Go on to Sheet 2