TM 5-5420-228-24
RESERVOIR QUADRANT REPLACEMENT (Sheet 2 of 4)
REMOVAL:
1.
Using 7/16 inch socket, remove two screws (A)
and starwashers (B) from clamps (C). Throw
starwashers away.
2.
Using adjustable wrench on bushing (D), remove
bushing (D) with its attached parts.
Using 3/4 inch socket, remove seven screws (E)
and lockwashers (F). Throw lockwashers away.
Using 1-5/16 inch socket, remove four screws (G)
and lockwashers (H). Throw lockwashers away.
Attach sling and lifting device to two handles (J).
CAUTION
Have a technician in vehicle watching while reservoir
quadrant (K) is raised to insure hoses and wiring harnesses
are not pulled out.
Have technician operating hoist lift reservoir quadrant (K) slowly from vehicle.
6.
TA251741
Go on to Sheet 3
4-93