TM 5-5420-228-24
HEU VALVE BANK AND BRACKET REPLACEMENT (Sheet 3 of 4)
INSTALLATION:
NOTE
Remove caps and plugs as necessary during installation.
1.
Position bracket assemblies (E, F) on valve bank (D).
2.
Using 3/4 inch socket and ratchet, install four screws (G) and four new lockwashers (H) thru bracket
assemblies (E, F) into the valve bank (D).
3.
After four screws (G) and four lockwashers (H) have been installed, using second technician, position valve
bank (D) and bracket assemblies (E, F) in vehicle.
4.
Install five screws (B) with new lockwashers (C) thru brackets (E) and (F), using 3/4 inch wrench to hold five
nuts (A), use a 3/4 inch socket and ratchet to tighten screws (B).
Go on to Sheet 4