TM 5-5420-228-24
GENERAL MAINTENANCE - Continued
Installation of New Studs
TOOLS: Screw threading set
1.
Using tap (A), clean out threads in hole (B).
2.
Using two wrenches, screw together and jam
two nuts (C) onto end of new stud (D).
3.
Using socket, loosely install new stud (D) into hole (B).
4.
Using torque wrench, tighten new stud (D) to
required value (refer to specific maintenance
procedure).
5.
Using two wrenches, remove two nuts (C)
from new stud (D).
End of Task
TA251288