TM 5-5420-228-24
GENERAL MAINTENANCE - Continued
Removal of Studs Broken Above Surface
TOOLS:
Ball peen hammer
Screw extractor set
Hand oiler
SUPPLIES:
Penetrating oil (Item 11, Appendix D)
Clean rags (Item 12, Appendix D)
1.
Using penetrating oil, lube threaded
area (A).
Using hammer, lightly tap stud (B).
2.
3.
Using hammer, tap stud remover (C)
on stud (B).
4.
Using wrench, turn stud remover (C)
counterclockwise.
5.
Using wrench, keep turning stud remover (C)
counterclockwise until stud (B) is removed
from threaded hole (D).
6.
Using clean rag, wipe out threaded hole
(D) and surface (E).
TA251287
End of Task