TM-5-5420-279-10
Position of Mudguard R clips
4.18.2.17 Disconnect the tail lift umbilical cable from the launch vehicle connection point. Fit
dust covers to the electrical connections at the umbilical cable end and the launch
vehicle.
4.18.2.18 Coil the tail lift umbilical cable and return the cable and the tail lift pendant to their
stowage position.
4.18.2.19 Install the two transportation securing straps from the launch vehicle to the tail lift.
WARNING
BURN HAZARD. WEAR SUITABLE GLOVES WHEN HANDLING HOT EXHAUST PARTS TO
AVOID BURNS. FAILURE TO OBSERVE THIS INSTRUCTION WILL RESULT IN SEVERE
PERSONAL INJURY.
4.18.2.20 Remove the 90 degree exhaust elbow from the top of the vehicle exhaust pipe.
4.18.2.21 Refit the top section of the vehicle exhaust pipe.
4.18.2.22 Stow the 90 degree exhaust elbow back in its stowage next to the crane hydraulic
manifold and interface enclosure.
4-111