TM-5-5420-279-10
Tail-lift - Lubrication
8.9.3.1
The locations of the lubrication points are indicated in Figure 8.8.
8.9.3.2
The lubrication points are located on each platform pivot pin, on the top and bottom
pivot pins of each cylinder and on the lower pivot pins of the lifting arm.
NOTE
Use MIL-PRF-10924 G grease to lubricate the tail-lift lubrication points.
8.9.3.3
Lubrication of the tail-lift should be carried every 50 hours of launcher operating time.
NOTE
Failure to grease at regular intervals can result in operating troubles and premature wear
on the bearings.
