TM-5-5420-279-10
(5)
The pivot points for the jib cylinder-boom (5).
(6)
The pivot points for the jib cylinder-linkage (6).
(7)
The pivot points for the boom-jib (7).
(8)
The pivot points for the jib cylinder-linkage (8).
Figure 8.11 Low Maintenance Lubrication Points Crane Jib
8.9.5.4
The procedure is as follows:
(1)
Clean the lubrication points thoroughly.
(2)
Grease the lubrication points.
Crane - As Necessary Lubrication Points
8.9.6.1
As necessary lubrication points, should be inspected at the 50 hour point and
lubricated if required.
8.9.6.2
The following lubrication points fall into this category:
(1)
Cam locks at the seat (9).
(2)
Stabilizer pivot points (10).