TM-5-5420-279-10
10.7.3 Removal
10.7.3.1
Remove one spring pin (1) and washer (2) from one side of pin (3). Discard the
spring pin.
10.7.3.2
Remove pin (3) and release opening sling (4).
10.7.4 Service/repair
10.7.4.1
Inspect components for damage and corrosion.
10.7.4.2
Inspect opening sling for cuts to outer sleeve. Small cuts in outer sleeve can be
taped-up to stop the entry of dirt and moisture, after checking there is no internal
damage.
10.7.4.3
Replace components as required.
10.7.5 Installation
10.7.5.1
Position opening sling between support brackets and insert pin (3).
10.7.5.2
Fit washer (2) to pin (3) and secure with new spring pin (1).
Figure 10. 12 Opening Sling Disassembly
