TM 5-5420-280-23&P
0065 00
WINCH ELECTRICAL HARNESS AND GROUND CABLE REPLACEMENT (Contd)
INSTALLATION
NOTE
Connect all electrical leads as noted during removal.
1. Route ground cable (5) to pallet A-frame (6), secure with new tiedown straps (2) as necessary, and
connect ground cable (5) to winch emergency switch mounting bracket (1) with washer (4) and
screw (3).
1
6
5
2
4
3
2. Position winch electrical harness cables (9) and (11), and connect control cable connector WINDE (7)
to receptacle (8) on winch electrical harness cable EX-75 (9).
3. Connect power cable connector EX-5 (13) to receptacle (12) on winch electrical harness cable
EX-2 (11).
4. Secure winch electrical harness cables (9) and (11) with new tie-down straps (10) as required.
Change 1
0065 00-6