TM 5-5420-280-23&P
0065 00
WINCH ELECTRICAL HARNESS AND GROUND CABLE REPLACEMENT (Contd)
INSTALLATION (Contd)
7. Connect control valve rope-in/out connector EX-5 (7) to rope-in/out control valve solenoid receptacle
(6) and tighten screw (8).
8. Connect pressure control valve connector EX-7 (2) to pressure control valve solenoid receptacle (9)
and tighten screw (1).
9. Connect proportional valve connector EX-4 (4) to proportional valve solenoid receptacle (5) and
tighten screw (3).
3
1
2
4
5
6
7
9
8
10. Connect ground cables (12) and (11) to ground stud (14) on winch electronics box (15) with washer
(13), star washer (24), washer (10), and nut (25) as shown.
11. Connect force transmitter connector EX-17 (17) to force transmitter receptacle (16).
Change 1
0065 00-8
