TM 5-5420-280-23&P
0105 00
ENGINE STARTER MOTOR REPLACEMENT (Contd)
REMOVAL
NOTE
Tag all leads for installation.
1.
Remove nut (9), lockwasher (8), battery cable (6), NATO slave cable (7), and lead (5) from terminal
stud (15) on solenoid (4). Discard lockwasher (8).
2.
Remove nut (11), lockwasher (12), and lead (10) from terminal stud (14) on solenoid (4). Discard
lockwasher (12).
3.
Remove two screws (3), lockwashers (2), and engine starter motor (13) from engine (1). Discard
lockwashers (2).
INSTALLATION
1.
Install starter motor (13) on engine (1) with two new lockwashers (2) and screws (3).
2.
Install lead (10) on terminal stud (14) of solenoid (4) with new lockwasher (12) and nut (11).
3.
Install lead (5), battery cable (6), and NATO slave cable (7) on terminal stud (15) of solenoid (4) with
new lockwasher (8) and nut (9).
4.
Connect battery ground cable. Refer to WP 0113 00.
5.
Operate starter motor. Refer to TM 5-5420-280-10.
6.
Install bridge halves on bridge pallet. Refer to WP 0018 00.
1
2
3
4
6
5
7
8
9
10
15
12
14
11
13
END OF WORK PACKAGE
0105 00-2