TM 55-1945-205-10-4
0034 00 4
0034 00
9.
If anchors, ground tackle and tension gear is not used, place in container.
DEPLOY THE MOORING LINES
1.
Position first pair of onshore mooring lines.
127(
The warping tugs hold the FC in position while the onshore mooring legs are emplaced.
a.
Unreel and extend first pair of mooring lines from container down FC outer edges, toward beach.
b.
Unreel and fake remaining lines down FC side.
c.
Attach ends of mooring lines to horizontal padeyes with 1 3/8 in. shackles.
d.
Manually pull mooring lines ashore and lay out along the outside edges of FC.
2.
Attach first pair of mooring lines (7) to the bulldozers (8).
:,1*
127(
Bulldozers may be used in lieu of onshore anchors to provide a temporary anchoring
point for mooring lines.
3.
Using bulldozers (8), pull and stretch mooring lines (7) onto beach until lines are at 45° angles to FC.
7
8
8
7
