INSTALL PERSONNEL SHELTER ELECTRICAL DISTRIBUTION PANEL TWO POLE CIRCUIT BREAKER

POLE CIRCUIT BREAKER - TM-55-1945-205-24-2_365

SINGLE POLE CIRCUIT BREAKER - TM-55-1945-205-24-2_367

TM-55-1945-205-24-2 Modular Causeway System (MCS) Roll-On/Roll-Off Discharge Facility Model (RRDF) RRDF-1 NSN 1945-01-473-2282 Manual
Page Navigation
289

TM 55-1945-205-24-2 0120 00 2 0120 00 2. Loosen two screws (2). 3. Pull wires (1) straight out of circuit breaker (3). 4. Firmly grasp circuit breaker (3) at the midline of the load bank (4) rotate circuit breaker (3) outward from mounting cleats (5) and discard. INSTALL PERSONNEL SHELTER ELECTRICAL DISTRIBUTION PANEL TWO POLE CIRCUIT BREAKER 1. Install the back side of the new circuit breaker (3) into mounting cleats (5). 2. Rotate circuit breaker (3) onto the midline of the load bank (4) until it snaps into position. WARNING 3. Coat wires (1) with silicone grease. 4. Remove tags and install wires (1) into circuit breaker (3) and tighten two screws (2). 5. Install personnel shelter load distribution panel access cover. (WP 0118 00) END OF WORK PACKAGE

Privacy Statement
Press Release
Contact