TM 55-1945-205-24-2
0270 00 2
0270 00
2.
Carefully separate six-socket plug (2) from its control receptacle (3).
3.
Carefully separate three-socket plug (4) from its control receptacle (5).
4.
Cut tiedown straps as necessary to facilitate removal of control cabling.
5.
Remove two nuts (6), lock washers (7), flat washers (8) and control mounting screws (9) securing control
assembly (10) to starboard side of RHIB control housing (11).
6.
From the inboard side of control assembly (10), loosen throttle handle allen head screw (12).
7.
Place a small tap punch against the allen head screw (12) and using a hammer, gently tap throttle handle (1) loose
from outboard side of the control assembly (10).
8.
Remove throttle handle screw (12).
9.
Remove throttle handle (1).
10. Remove three assembly screws (13) holding the control assembly (10) halves together.
CAUTION
Carefully separate sealed housing halves. Failure to comply could result
in equipment damage.
11. Separate control assembly housing (14) from control assembly cover (15).
23
14
25
21
24
22
26
15
19
16
20
18
17
27
28
