TM 55-1945-205-24-2
0278 00 2
0278 00
2.
Remove boot cap (2) and discard.
3.
Remove round nut (3) from circuit breaker (1) by turning counterclockwise.
4.
Remove circuit breaker (1) from control console (4) and discard circuit breaker (1).
INSTALL RHIB INSTRUMENT PANEL CIRCUIT BREAKERS
1.
Install new circuit breaker (1) into hole in control console (4).
2.
Install round nut (3) on circuit breaker (1) by turning clockwise. Tighten round nut (3).
3.
Install new boot cap (2) over circuit breaker (1).
4.
Connect wiring to rear of circuit breaker (1) and remove tag.
5.
Install RHIB battery negative lead terminal. (WP 0336 00)
6.
Perform operational check of RHIB. (TM 55-1945-205-10-2)
END OF WORK PACKAGE
2
3
1
4
