TM 55-1945-205-24-2
0309 00 3
0309 00
PERFORM RHIB ENGINE SPARK PLUG WIRE RESISTANCE TEST
1.
Set multimeter (1) to measure resistance.
2.
Connect black lead (2) and red lead (4) to opposite ends of the spark plug wire (8).
3.
Verify reading to be at or near 0 W.
4.
Repeat these steps for each spark plug wire (8).
5.
If readings do not meet the requirements as specified, replace defective spark plug wires. (WP 0308 00)
PERFORM RHIB ENGINE POWER TEST
NOTE
A steady spark in the tester, before or at specified amperage, indicates a good coil.
1.
Connect spark plug wire (8) to the coil (6).
10C359-2
1
8
4
2
0
