TM 5-5420-202-20-2
TRANSMISSION MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 2 of 4)
REMOVAL:
Using diagonal cutting pliers, cut safety wire
1.
(A) and remove it from bushing (B) and bracket
(C).
Using 3-1/8 inch socket and T-slide handle
2.
remove bushing (B) from bracket (C).
3. Using resilient mount tool assembly,
remove two mounts (D) from bracket
(c).
4. Using 1/2 inch square drive bit screwdriver
and 1/2 inch drive ratchet to hold screw
(E), use 1-1/4 inch open end wrench to
remove nut (F) from screw (E).
5. Remove screw (E) and roller (G) from
bracket (C).
6. With second man using 1-1/2 inch open
end wrench to hold bolt (H), use 1-1/2
inch socket and extension to remove
nut (J) from bolt (H).
Remove washer (K) and bolt (H) from
7.
bracket (C).
Go on to Sheet 3
6-9
