TM 5-5420-202-20-2
ENGINE MOUNTS (LEFT AND RIGHT) REPLACEMENT (Sheet 1 of 3)
TOOLS: T-slide handle with 3/4 in. drive (2 required)
36 in. extension (cheater bar)
1-1/8 in. socket with 3/4 in. drive
Ratchet with 3/4 in. drive
1/2 in. socket with 1/2 in. drive
Ratchet with 1/2 in. drive
1-1/8 in. open end wrench
Torque wrench with 3/4 in. drive (0-600 ft-lb) (0-813 NZm)
SUPPLIES:
Dry cleaning solvent (Item 55, Appendix D)
Gloves (Item 69, Appendix D)
Rags (Item 65, Appendix D)
Goggles (Item 70, Appendix D)
P R E L I M I N A R Y PROCEDURE:
Remove powerplant (page 5-2).
NOTE
Removal and installation of left and right
engine mounts are the same.
REMOVAL:
1.
Using 1/2 inch socket, remove two screws
(A) and washers (B) securing bracket (C).
Remove bracket (C).
Go on to Sheet 2