TM 5-5420-202-20-2
ENGINE OIL COOLER (LEFT AND RIGHT) REPLACEMENT (Sheet 3 of 6)
11.
Using 1/2 inch socket with extension
through harness and into bracket, remove
two screws and lockwashers (J).
12.
Lower harness away from coolers with
b r a c k e t attached.
13.
Using 1/2 inch socket, remove four screws and
lockwashers (K) holding oil cooler screen
to cooler.
14.
Lift away oil cooler screen.
Support oil cooler to keep it from falling while doing step 15.
15.
Using 3/4 inch socket, remove four screws and lockwashers (L) holding oil cooler frame.
16.
Lift away oil cooler and mounting brackets.
Go on to Sheet 4
6-21
