TM 5-5420-202-20-2
POWERPLANT LEFT BANK OIL COOLER FRAME AND BRACKETS REPLACEMENT (Sheet 6 of 9)
INSTALLATION:
NOTE
Because of space limitations, it may
be necessary to interchange like size
sockets with wrenches to get at a
particular screw.
1.
Install screw (A) through bracket (B).
2.
Position bracket (B) and screw (A) on engine.
3.
Install clamp and two shims (C) on screw (A).
Using 9/16 inch socket and 9/16 inch wrench,
4.
install nut (D).
5.
Using 1/2 inch socket with extension, install
nuts (E).
6.
Position bracket (F) on engine.
7.
Using 1/2 inch socket with extension
or 1/2 inch wrench, install nuts (G).
8.
Position clamp (H) on fuel line and
install screw (J) through clamp (H)
and bracket (F).
Using 1/2 inch socket and 1/2 inch
9.
wrench, install nut (K) on screw (J).
10.
Using 1/2 inch socket with extension,
install four brackets (L).
Position frame support brackets (M) on engine
11.
and, using 11/16 inch socket, install two
new locknuts (N) to secure each frame sup-
port bracket (M).
Go on to Sheet 7
