TM 5-5420-202-20-2
AIR CLEANER INTAKE AND HOSE REPLACEMENT (Sheet 3 of 5)
11.
Using an extension, universal joint, and 9/16 inch
socket, remove six nuts and lockwashers (K).
12.
Using a 3/8 inch wrench, loosen clamp nut (L)
at end of intake hose (B), remove clamp (M).
13. Remove hose (B) from flange (N).
Separate intake (P) and screen (Q) with gaskets (R) from flange (N).
14.
15.
Clean and inspect screen and gaskets. If screen is damaged or defective, replace.
16.
If one or both gaskets (R) are damaged, scrape gaskets (R) from screen (Q). Apply
adhesive to new gasket and position onto screen.
17.
Inspect and replace studs (S) in flange (N) as necessary.
Go on to Sheet 4
7-67