TM 5-5420-202-20-2
AIR CLEANER INTAKE ELBOW REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1. Using 3/8 inch wrench, loosen clamp nut (A).
2. Slide clamp (B) down to middle of hose (C).
3. Disconnect hose (C) from elbow (D).
4. Using 9/16 inch socket, universal joint, extensions and 9/16 inch wrench, as necessary,
remove 10 self-locking nuts (E) securing elbow (D).
5. Using pry bar, pry elbow (D) from air cleaner.
6. Remove elbow (D) off studs (F) of air cleaner.
7. Remove and discard gasket (G) from studs of air cleaner.
Go on to Sheet 3
7-72
