TM 5-5420-202-20-2
AIR CLEANER TURBOCHARGER ELBOW REPLACEMENT (Sheet 2 of 3)
REMOVAL:
1.
Using screwdriver, loosen two clamps
(A).
2.
Disconnect hose assembly (B) from
outlet elbow (C) of air cleaner
and elbow (D) of turbocharger.
3.
Remove hose assembly (B).
Using socket with extension and wrench,
4.
remove eight nuts, lockwashers, and flat
washers (E) securing elbow (D) to
turbocharger.
Remove elbow (D) and gasket (F). Throw
5.
gasket away.
Make sure turbocharger inlet mating
6.
surface is not nicked, burred, or
d a m a g e d . If turbocharger inlet mating
surf ace is damaged, notify support
maintenance. Make sure eight nuts
and studs are not stripped or damaged.
Repair as necessary.
7-75