TM 5-5420-202-20-2
HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 2 of 3)
Using 5/8 inch wrench on bushing (C)
5.
and 1 inch wrench on coupler assembly
(E), remove bushing (C).
6.
Using 1 inch wrench on coupler assembly
(E) and 5/8 inch wrench on bushing (D),
remove coupler (E).
7.
Using two 5/8 inch wrenches, remove
bushing (D) from hose assembly (F).
Using two 5/8 inch wrenches, remove
8.
quick-disconnect (G) from bushing (H).
Using two 5/8 inch wrenches, remove
9.
bushing (H) from hose assembly (F).
C L E A N I N G AND INSPECTION:
1.
Using rags, clean hose assembly (F), coupler assembly (E), and quick disconnect (G).
2.
Inspect hose assembly (F) and coupler assembly (E) for cracks and breaks. If damaged,
replace hose assembly (F) and coupler assembly (E).
Go on to Sheet 3
7-176