TM 5-5420-202-202
HOSE ASSEMBLY (TO PURGE LINE) REPLACEMENT (Sheet 1 of 3)
TOOLS:
9/16 in. combination box and open end wrench
5/8 in. open end wrench (2 required)
1 in. open end wrench
SUPPLIES:
Rags (Item 12, Appendix D)
P R E L I M I N A R Y PROCEDURE:
Remove powerplant from vehicle (page 5-2)
REMOVAL:
1. Using 9/16 inch wrench,
remove nut (A) from clamp (B).
2. Remove clamp (B).
l
3. Using 5/8 inch wrench,
loosen bushing (C).
4. Unscrew hose assembly (D)
from engine.
Go on to Sheet 2